Self adjustable pipe tank welding turning rotators can align by itself according to the cylinder diameter, adopting cycloid pinwheel reducer or worm gear speed reducer。 there are three kinds of rollers : rubber rollers, steel rollers, and steel and rubber combined rollers。 Self adjustable pipe tank welding turning rotators is used mainly for welding, polishing, and assembling and so on, working with other equipment, can realize the cone being assembled and welded。 Self adjustable pipe tank welding turning rotators apply widely to wind power,pressure vessel, petrifaction, pipe, steel structure, and overlaying industries。 We can design and make specifically on the users’ requirement。
Self adjustable pipe tank welding turning rotators can adjust itself according to the diameter of cylinder. Its drive adopts cycloidal pinwheel reducer or worm gear reducer, dual motor drive. According to the needs of users, the roller can be divided into rubber wheel, steel wheel and steel rubber combined wheel, which can be controlled with other equipment. Self adjustable pipe tank welding turning rotators is mainly used for welding, polishing, lining and assembling of cylindrical cylinders, and also for assembling and welding conical and sectional unequal-diameter revolving bodies in combination with other assemblies.
1.The physical construction of the self adjusting roller:
Self-adjusting roller is composed of primary frame and secondary frame .The primary part is composed of foundation, motor, transmission gear, swing arm and wheels.The secondary part is composed of foundation, swing arm and wheels.
2.Working principle and structure characteristics:
The working way of Self-adjusting rollers is that active frame,two motors and reducer controlled by the same ac motor driver realize the two motors stepless speed change and synchronization operation。 The motor drive the main driving wheel working through drive system。
The work piece is putted on the primary and secondary wheels, when the primary wheel running, the friction between workp iece and primary wheel can drive the work piece rotating。 The friction between rotating work piece and secondary wheel can drive the secondary wheel running。
Each swing arms of the self-adjusting roller can drive work piece to adjust the diameter by itself, so that the labour power is saved much and the work efficiency is increased.
|Roller material||Polyurethane steel|
|Speed Regulation Mode||Frequency Control|