CN|   EN
  • Selection and use of power supply for CNC plasma cutting machine

    2019-09-30 14:18

    Selection and use of power supply for CNC plasma cutting machine

    CNC cutting machine is a rough equipment. Its advantage lies in the use of CNC automatic operation instead of manual cutting, which improves cutting efficiency and machining accuracy. The high-speed stability of CNC equipment is unmatched by general hand-held cutting. China's cutting machine machining accuracy standards can reach ± 0.5mm.

    View More
  • What if the plasma cutting machine is too low?

    2019-09-29 16:10

    What if the plasma cutting machine is too low?

    When the plasma cutting machine is working, if the working pressure is far lower than the pressure required by the specification, this means that the discharge speed of the plasma arc is weakened, and the input air flow rate is less than the specified value。 At this time, a high energy, high speed plasma arc cannot be formed。 As a result, the quality of the incision is poor, the cut is not penetrated, and the incision accumulates。 The reasons for the lack of air pressure are: insufficient air input to the air compressor, low pressure regulation of the air regulator valve of the cutting machine, oil stain in the solenoid valve, and unobstructed air passage。

    View More
  • Tips for improving the cutting efficiency of CNC cutting machines

    2019-09-26 14:29

    Tips for improving the cutting efficiency of CNC cutting machines

    Tips for improving the cutting efficiency of CNC cutting machines。When using a CNC cutting machine, how to improve cutting efficiency is a serious consideration for the company。

    View More
  • Using the CNC plasma cutting machine to hang the slag problem

    2019-09-25 16:15

    Using the CNC plasma cutting machine to hang the slag problem

    Considering that the current CNC plasma cutting machine is mainly used for cutting and processing special materials such as stainless steel, the slag disposal is more difficult than the carbon plate. For processing companies or users who are looking to reduce secondary processing, how to reduce the residue of slag and improve the quality of flatness is a question that many companies valued.

    View More
  • CNC plasma cutting machine can not solve arc solution

    2019-09-25 16:12

    CNC plasma cutting machine can not solve arc solution

    The stability of the arc of the CNC plasma cutting machine directly affects the cutting quality. The instability of the plasma arc can lead to defects such as jagged indentation and accumulation of tumors. It also leads to a decrease in the life of related components of the control system, and frequent replacement of nozzles and electrodes.

    View More
  • How to control the cutting error of CNC flame cutting machine

    2019-09-25 15:37

    How to control the cutting error of CNC flame cutting machine

    The CNC cutting machine is divided into the flame cutting machine and the same ion cutting machine. Both of them will generate heat of processing. So it is inevitable that the workpiece will be deformed and affect the accuracy of the product. However, from the point of view of use, the error of the CNC flame cutting machine is controlled at an appropriate level. It is the primary condition for cutting and cutting of enterprises.

    View More
Copyright © Jinan Huafei CNC Machine Co., Ltd. Lu ICP 11012631. Technical support
奔驰彩票注册 秒速赛车平台 秒速赛车平台 幸运飞艇注册 幸运飞艇注册 秒速赛车平台 秒速赛车平台 秒速赛车平台 秒速赛车平台 幸运飞艇官网